Pamco ignition kit with high output Magna coils for the Kawasaki KZ650. This is a great kit to modernize the stock ignition system!
Install an electronic ignition to eliminate the entire points and condensers assembly. This electronic ignition comes with an aluminum rotor that replaces the stock rotor on the spark advancer. The stock spark advancer is still used, just the rotor is replaced. The ignition taps into the stock wiring harness very easily. You must connect your own terminals to the wires coming from the ignition. It receives power from the rear brake switch black lead or you can tap into another switched power source. This electronic ignition uses hall effect sensor technology.
Please read the Pamco installation instructions prior to purchasing if you're planning to install this yourself. You can view them here.
- 2 Magna High Output Coils
- 4 NGK Spark Plug Caps
- 6 Feet of Spark Plug Wire
- 1 Pamco Electronic Ignition
- Primary Resistance = 5 ohms
- Secondary Resistance = 17,500 ohms
- Mounting Holes = 90mm or 102mm (measured center to center)
- Mounting Posts = 13mm Width x 12mm Height
- Includes Hardware, wiring and boots shown in the photo.
Installation Notes: The Pamco ignition does Not come with terminal connectors so you can choose what type you'd like. We carry a variety of Terminal Connectors / insulators and a crimping tool. Wires on the coils can be mounted on either terminal (no polarity + or - )
Fits Kawasaki: (fits years that came with points)
KZ650-B1 - 1977
KZ650-B2 - 1978
KZ650-B2A - 1978
KZ650-B3 - 1979
KZ650-C1 Custom - 1977
KZ650-C2 Custom - 1978
KZ650-C3 Custom - 1979
KZ650-D1 SR - 1978
KZ650-D1A SR - 1978
KZ650-D2 SR - 1979
KZ650-E1 LTD - 1980
KZ650-F1 - 1980