Pamco ignition kit for the Honda CB/CL450K and CB500T twins. This is a great kit to modernize the stock ignition system!
The Pamco electronic ignition comes with an aluminum rotor that bolts directly to the cam, no more mechanical advancer! There is a fully electronic (MCU) electronic advance (blue box) that should be installed under the seat away from the engine and the coils. The ignition taps into the stock wiring harness very easily. You must connect your own terminals to the wires coming from the ignition. This electronic ignition uses hall effect sensor technology. Comes with ignition trigger plate, aluminum rotor, eletronic advance, and a 1 year warranty from PAMCO. Sensors are individually adjustable for exact matched timing for both cylinders.
- 2 Magna High Output Coils
- 2 NGK Spark Plug Caps
- 4 Feet of Spark Plug Wire
- 1 Pamco Electronic Ignition
- 1 Regulator Rectifier
- Primary Resistance = 5 ohms
- Secondary Resistance = 17,500 ohms
- Mounting Holes = 90mm or 102mm (measured center to center)
- Mounting Posts = 13mm Width x 12mm Height
- Includes Hardware, wiring and boots shown in the photo.
Installation Notes: This coil has polarity, there is a + symbol and a - symbol on the coil. + is the power input. The Pamco ignition does Not come with terminal connectors so you can choose what type you'd like. We carry a variety of Terminal Connectors / insulators and a crimping tool
Fits Honda: (these coils do not bolt on to the stock bracket - custom brackets might be necessary)
CB450K - 1965-1974
CL450K - 1968-1974
CB500T - 1975-1976