10mm / 3/8" sealing washer 10 Pack. This washer can be used on most motorcycles with disc brakes, it can be used on any of the banjo bolts on the brake lines as long as they are 10mm bolts. For use on front and rear brake master cylinders. Two washers are needed for every banjo bolt, one goes between the bolt head and the metal brake hose fitting and one goes between the hose fitting and the master cylinder. Torque the bolt down to spec so that it creates a seal, then proceed to bleed the brakes.
These washers have a pretty universal fitment, so check the dimensions against what you currently have to make sure they'll work. They are unique in that they have a tapered rubber seal. Crush washers should not be re-used, but these can be used multiple times.
Inner diameter: 10.1mm
Outer Diameter: 14.9mm
Thickness: 3mm (including the seal) metal washer is 2mm thick
These are the same washers that come on the 80's style complete master cylinder. We also have aluminum and copper crush washers.
Replaces Honda Part Number: 90545-300-000
Fits Honda:
MB5 - 1982
CR80R - 1986-2000
CB125S - 1974-1978
CR125R - 1984-2000
MT125R - 1977-1978
CB200K - 1974
CB200T - 1975-1976
CMX250 Rebel - 1985-2000
CR250R - 1984-2000
XR250R - 1984-2000
CB350F - 1972-1974
CB350G - 1973
XL350R - 1984-1985
CB360T - 1975-1976
CB360G - 1974
CB400A - 1978
CB400F Super Sport - 1975-1977
CB-1 (CB400F) - 1989-1990
CB400T - 1980-1981
CB400TII - 1978-1979
CM400A - 1979-1981
CM400C - 1981
CM400T - 1979-1981
CB450K - 1970-1974
CB450SC Nighthawk - 1982-1986
CB450T - 1982
CM450A Hondamatic - 1982-1983
CM450C - 1982
CMX450C Rebel - 1986-1987
CB500K - 1971-1973
CB500T Twin DOHC - 1975-1976
CX500C/D/TC - 1978-1982
FT500 - 1982-1983
GB500 - 1989-1990
GL500/I - 1981-1982
VF500C Magna - 1984-1985
VF500F Interceptor - 1984-1986
VT500C Shadow - 1983-1986
VT500FT AScot - 1983-1984
XR500R - 1983-1984
CB550F Super Sport - 1975-1977
CB550K - 1974-1978
CB550SC Nighthawk - 1983
CB650 - 1979-1982
CB650C Custom - 1980-1981
CB650SC Nighthawk - 1982-1985
CX650C/T - 1983
GL650/I - 1983
NT650 Hawk - 1988-1991
CB700SC - 1984-1986
VF700C Magna - 1984-1987
VF700F Interceptor - 1984-1985
VF700S Saber - 1984-1985
VFR700F Interceptor - 1986-1987
VT700C Shadow - 1984-1987
CB750A Hondamatic - 1976-1978
CB750C Custom - 1980-1982
CB750F Super Sport - 1975-1982
CB750K - 1969-1982
CB750SC - 1982-1983
VF750C V45 Magna - 1982-1988
VF750F - 1983-1984
VF750S - 1982-1983
VFR750F - 1986
VT750C - 1983
CB900C - 1980-1982
CB900F Super Sport - 1981-1982
CBX - 1979-1982
CB1000C - 1983
GL1000 - 1975-1979
VF1000F/R - 1984-1986
CB1100F - 1983
GL1100/I/A - 1980-1983
GL1200/A/I - 1984-1987
and many others....
5 Reviews Hide Reviews Show Reviews
-
Works Like a Charm
Purchased these because I could not get the standard copper washer to seal the Banjo Bolts on my 89 Corvette. Installed these and problem solved!
-
A must have
A must have if your replacing the hoses. Sealed great, no leaks 1977 CB550K
-
Quality Product
Inexpensive "universal" product to have on hand. Works exactly like it's supposed to. Great value!
-
Quality seals
Seals installed as they should. Very durable.
-
Banjo Bolt Sealing Washer - 10mm - 10 Pack
Much better than regular crush washers at sealing brake components and lines. Never going back to copper washers as long as these are available.