Countershaft Oil Seal - 34X52X13.5X15.5 - Honda TL/XL250 CB/SL/XL350 CB/CJ/CL360 CB400F

This Countershaft oil seal is found behind the front sprocket on the models listed below. 

This is a high quality new seal produced in Taiwan. When it comes to rubber parts and seals it's generally better to install a brand new part instead of using a NOS part which has hardened due to age.

A great way to isolate where an oil leak is coming from is to clean the area thoroughly, put some baby powder on the area you suspect it's coming from, then go for a 5-10 minute ride. Voila, the leaks location is revealed! Clean everything thoroughly and install the new seal with a deep socket with the same outer diameter as the seal or a seal driver. Make sure to push it in evenly. An oil tight engine puts the mind at ease and it keeps the engine lubricated!

*Sometimes a light coating of three-bond or hondabond is necessary to keep the seal from popping back out if you have a recurring problem. We have Hondabond available.

Replaces Honda Part Numbers: 91205-333-015, 91205-333-005, 91205-312-013
Dimensions: 34X52X13.5X15.5
Material: NBR (Nitrile)

Fits Honda:

TL250 Trials - 1975-1976
XL250 Motosport - 1972-1976
CB350F Four - 1972-1974
SL350K1/K2 Motosport - 1970-1973
XL350 - 1974-1978
CB360 - 1974
CB360G - 1974
CB360T - 1975-1976
CJ360T - 1976-1977
CL360 Scrambler - 1974-1975
CB400F Super Sport - 1975-1977