Engine Rebuild Kit - Honda Z50A - 1968-1978

Engine rebuild kit for the Honda Z50A Mini Trail from 1968-1978. Time to rebuild? If you're diving in and replacing engine gaskets and seals this is a great kit to have on hand! The piston rings are for the stock bore.

Installation Tips:

• Press your seals in straight with a seal driver or a socket with a slightly smaller OD than the seal. Both surfaces must be free of dirt to create an oil tight seal.
• All sealing surfaces for gaskets must be clean and flat to make a proper seal, sometimes non-hardening sealant is necessary.
• Be very careful when installing the cylinder over new rings, it's helpful to have the proper tool to keep the rings compressed as you lower the cylinder over the pistons. Try to use only plastic tipped tools to prevent from scratching aluminum surfaces.
• The Letter stamped on the top two rings should be facing up when installing them and stagger the ring gaps according to the manual.

Piston Ring Order:

Top Compression Ring (silver outer rim)
Second Ring (black outer rim)
Bottom Rings (3 pieces - Spacer in the middle - 1 thin wiper ring on either side)

Fits Honda:

Z50A Mini Trail - 1968-1978