Set of 2 forks seals and 2 dust seals for the models listed below. When replacing fork seals be very careful not to scratch or gouge the aluminum during the removal of the old seals. Use a fork seal driver to install the new seals or use the old seal to help drive in the new seal. Be sure to drive it in evenly and make sure it fully seats so the snap ring can be installed. If you're unsure if your forks are stock please check the fork seal dimensions. The old dust boots become stiff and start to crack over time, keep dirt and water off your fork seals with a fresh pair of boots! If you're replacing the fork seals, that's a perfect time to replace the dust boots.
These are high quality reproduction seals produced in Taiwan. When it comes to rubber parts and seals it's generally better to install a brand new part instead of using a NOS part which has hardened due to age.
Clean everything thoroughly and install the new seals with a deep socket with the same outer diameter as the seal or a seal driver. Make sure to push them in evenly.
Fork Seal:
Inner Diameter: 35mm
Outer Diameter: 48mm
Height: 11mm
Dust Seal:
Top Opening ID: 34mm (1.3")
Bottom Opening ID: 43.6mm (1.7")
Overall OD: 52mm (2")
Overall Height: 15mm (.58")
Fits Honda:
CRM50R - 1993-1996 - European Model
CRM75R - 1989-1994 - European Model
CR80R - 1987-1995
CR125M Elsinore - 1977-1978
NSR125R - 1993-2001 - European Model
VT125 Shadow - 1999-2007 - European Model
XL125 Varadero - 2001-2015 - European Model
XR200R - 1981-1983
ATC250R - 1983-1984
VTR250 Interceptor - 1988-1990
XL250R - 1982-1983
XR250 - 1979-1980
NSS300A - 2014-2016
ATC350X - 1985-1986
CX500C Custom - 1981-1982
GB500 Tourist Trophy - 1989-1990
GL500 Silver Wing - 1981-1982
GL500I Silver Wint Interstate - 1981-1982
XR500 - 1979-1980
CB650 - 1979-1982
CB650C Custom - 1980-1981
CB750C Custom - 1981-1982
CB750F Super Sport - 1977-1980
CB750K Four - 1979-1982
CB750L Limited Edition - 1979
CBX Super Sport - 1979-1980
Fits Kawasaki:
KX80 - 1990-1991
EX250 Ninja - 1986-1987
ZX550 GPZ - 1984-1985
Fits Suzuki:
RM80 - 1989-2001
DR125 - 1986-1988
DR125SE - 1994-1996
SP125 - 1986-1988
DR200 - 1986-1988
DR200SE - 1996-2007
SP200 - 1986-1988
GR650 Tempter - 1983
GS750T - 1983
Fits Yamaha:
XTZ125 SA - 2003-2010
RT180 - 1995-1998
XS400 & Maxim - 1982-1983
3 Reviews Hide Reviews Show Reviews
-
Fork Seal Kit
The parts fit and went together awesome. Good quality kit for the price.
-
Random internet person reviews product!
Got this kit for my '79 CB750L, both the seals and boots fit great and now my forks don't leak and the suspension feels great. Just what I wanted!
-
Good Quality
Rubber was nice and flexible, which is what you need in a good seal. Be careful not to gouge your forks removing the old ones!