Fork & Dust Seal Kit - Honda CR80R CB/CJ360 CB/CM400 CM450 CX500

Reproduction dust seals / boots for 33mm forks. The old dust boots become stiff and start to crack over time, keep dirt and water off your fork seals with a fresh pair of boots! If you're replacing the fork seals, that's a perfect time to replace the dust boots. If your model isn't listed below please read the dimensions and compare them to your current boots. These boots can also be used on some forks that have the accordion type dust boots, check the dimensions below.

Fork Seal:

Inner Diameter: 33mm
Outer Diameter: 46mm
Height: 11mm
Material: NBR (Nitrile)

Dust Seal:

Top Opening ID: 31.5mm (1 1/4")
Bottom Opening ID: 53mm (2.1")
Overall OD: 60mm (2.35")
Overall Height: 31.5mm (1 1/4")

Fits Honda:

CR80R - 1984
CB360K - 1974
CB360G - 1974
CB360T - 1975-1976
CJ360T - 1976-1977
CB400A Hondamatic - 1978
CB400F Super Sport - 1975-1977
CB400T Hawk - 1980-1981
CB400TI Hawk I - 1978-1979
CB400TII Hawk II - 1978-1979
CM400A Hondamatic - 1979-1981
CM400C Custom - 1981
CM400E - 1980-1981
CM400T - 1979-1981
CB450SC Nighthawk - 1982-1986
CB450T Hawk - 1982
CM450A Hondamatic - 1982-1983
CM450C Custom - 1982
CM450E - 1982-1983
CX500 - 1978-1979
CX500C Custom - 1979-1980
CX500D Deluxe - 1979-1981

Fits Yamaha:

XS360 - 1976-1977
XS400 & Maxim - 1977-1981

Fits Kawasaki:

KX80 - 1983
KZ305 - 1981-1988
KZ400 H1 - 1979
KZ400A - 1977-1978
KZ400B - 1978-1979
KZ400C - 1978
KZ400D - 1975-1977
KZ400S - 1975-1977
KZ440A LTD - 1980-1983
KZ440B - 1980-1981
KZ440D LTD Belt - 1980-1983
KZ440G - 1982

Fits Suzuki:

GN250 - 1982-1988
GS250 - 1980-1981
GT250 Hustler - 1975-1977
GS300L - 1982-1983
GT380 Sebring - 1974-1977
GS400 - 1978
GS400X - 1977-1978
GS425 - 1979
GS450 - 1980-1983