Front brake caliper kit for many of the Honda 350-550 models from the 70's. Comes with everything shown in the photo as well as the plastic ring that goes between the brake pad and the piston. Be sure to coat the piston and piston seal with brake fluid or an equivalent lubricant before installing them. We have DOT4 brake fluid available. We also carry a complete caliper assembly if you need all the parts.
This presents a solution to these questions...."what do I do if my piston is heavily pitted and so is the inside of my caliper?" or "my pads are toast, my bleeder valve is seized and so is my piston!" Yes, some of us just start cleaning, soaking and scrubbing all the parts and replace individual parts such as the piston, seal and bleeder valve but if you want your caliper looking and working like new and you want to save a lot of time, get the complete caliper. Finish the job in minutes rather than hours!
Kit Includes:
1 - Bleeder Cap
1 - Steel Piston
1 - Bleeder Valve
1 - Piston Seal
1 - Pad A
1 - Pad B
1 - Caliper A
1 - Cotter Pin
2 - Mounting Bolts
2 - Washers For Mounting Bolts
Fits Honda:
CB350F Four - 1972-1974
CB350G - 1973
CB360 - 1974
CB360G - 1974
CB360T - 1975-1976
CB400F Super Sport - 1975-1977
CB450K Super Sport - 1972-1974
CB500T DOHC Twin - 1975-1976
CB500K Four - 1971-1973
CB550F Super Sport- 1975-1977
CB550K Four - 1974-1978
10 Reviews Hide Reviews Show Reviews
-
78 CB550
Works great on my 78 CB550. I ran through a couple emergency stop tests and grabbed a little hard and accidentally locked up the front wheel so they are working good. Make sure you get the caliper centered or it will squeal like a pig.
