This oil seal goes behind the front sprocket on the SOHC Honda CB750 from '77-'78.
This is a high quality new seal produced in Taiwan. When it comes to rubber parts and seals it's generally better to install a brand new part instead of using a NOS part which has hardened due to age.
A great way to isolate where an oil leak is coming from is to clean the area thoroughly, put some baby powder on the area you suspect it's coming from, then go for a 5-10 minute ride. Voila, the leaks location is revealed! Clean everything thoroughly and install the new seal with a deep socket with the same outer diameter as the seal or a seal driver. Make sure to push it in evenly. An oil tight engine puts the mind at ease and it keeps the engine lubricated!
*Sometimes a light coating of three-bond or hondabond is necessary to keep the seal from popping back out if you have a recurring problem. We have Hondabond available.
Replaces Honda Part Number: 91205-405-005
Dimensions: 30 X 62 X 7 (Replaces original seal which was 29.8X62X7)
Material: NBR (Nitrile)
Fitment Note: From '69-'76 Honda used a smaller seal which we also carry here. Make sure your engine is stock, it is not uncommon to have a non stock motor. Engine numbers in 1977 started with: CB750E-27
Fits Honda:
CB750F Super Sport - 1977-1978
CB750K - 1977-1978
1 Review Hide Reviews Show Reviews
-
it fit, it works
put it in, it fit, it does what its supposed to, enough said.
