Gearshift Drum / Crankcase Oil Seal - 12X25X4.5 - Honda CB/CL160/175/200/72/77/350K/450K CB500/550/650

$1.95
(1 review) Write a Review
Availability:
Ships in 24 hours
Adding to cart… The item has been added

This oil seal was primarily used on the gearshift drum, it was also used as a crankcase seal. The section of the parts fiche where this seal is found is listed for each model below. This seal was used on models from the late 50's all the way through the early 80's.

This is a high quality new seal produced in Taiwan. When it comes to rubber parts and seals it's generally better to install a brand new part instead of using a NOS part which has hardened due to age.

A great way to isolate where an oil leak is coming from is to clean the area thoroughly, put some baby powder on the area you suspect it's coming from, then go for a 5-10 minute ride. Voila, the leaks location is revealed! Clean everything thoroughly and install the new seal with a deep socket with the same outer diameter as the seal or a seal driver. Make sure to push it in evenly. An oil tight engine puts the mind at ease and it keeps the engine lubricated!

Replaces Honda part number: 91201-283-000, 91201-283-005, 91201-292-003, 91202-426-003
Dimensions:12 X 25 X 4.5
Material: NBR (Nitrile)

Fits Honda:

CB92 Benly Super Sport 125 - 1959-1962 - LOWER CRANKCASE + KICK STARTER + UPPER CRANKCASE + SHIFT DRUM
CL125A Scrambler - 1967-1969 - LOWER CRANKCASE + KICK STARTER
SS125A Super sport 125 - 1967-1969 - LOWER CRANKCASE + KICK STARTER
CA160 Touring - 1966-1969 - LOWER CRANKCASE + KICK STARTER
CB160 - 1965-1969 - LOWER CRANKCASE + KICK STARTER
CL160 Scrambler - 1966-1967 - LOWER CRANKCASE + KICK STARTER
CA175 Touring - 1968-1970 - LOWER + UPPER CRANKCASE
CB175K - 1969 - LOWER + UPPER CRANKCASE
CB175K - 1970-1973 - GEARSHIFT FORK + DRUM + GEARSHIFT SPINDLE + CHANGE PEDAL
CL175K0-K3 Scrambler - 1968-1970 - LOWER + UPPER CRANKCASE
CL175K4-K7 Scrambler - 1970-1973 - GEARSHIFT FORK + DRUM + GEARSHIFT SPINDLE + CHANGE PEDAL
SL175K - 1970-1972 - GEAR SHIFT FORK + DRUM + GEARSHIFT SPINDLE + CHANGE PEDAL
CB200K - 1974 - GEARSHIFT FORK + DRUM
CB200T - 1975-1976 - GEARSHIFT FORK + DRUM
CL200 Scrambler - 1974 - TRANSMISSION + GEARSHIFT DRUM
CA72 Dream Touring 250 - 1960-1966 - GEAR CHANGE
CB72 Hawk 250 - 1961-1966 - GEAR CHANGE
CL72 Scrambler 250 - 1962-1965 - GEAR CHANGE
CA77 Dream Touring 305 - 1961-1969 - GEARSHIFT
CB77 Super Hawk 305 - 1961-1968 - GEAR CHANGE
CL77 Scrambler 305 - 1965-1968 - GEAR CHANGE
CB350K - 1968-1973 - SHIFT DRUM + SHIFT FORK
CB350G - 1973 - SHIFT DRUM + SHIFT FORK
CL350K Scrambler - 1968-1973 - SHIFT DRUM + SHIFT FORK
SL350K - 1969-1973 - SHIFT DRUM + SHIFT ARM
CB450K - 1965-1974 - LOWER + UPPER CRANKCASE
CL450K Scrambler - 1968-1974 - LOWER + UPPER CRANKCASE
CB500K - 1971-1973 - GEARSHIFT FORK + DRUM
CB500T - 1975-1976 - KICK STARTER + SIDE SPINDLE
CB550K - 1974-1978 - TRANSMISSION + KICK STARTER SPINDLE/ SHIFT DRUM + SHIFT FORK
CB550F - 1975-1977 - GEARSHIFT DRUM
CB650 - 1979-1982 - GEARSHIFT DRUM
CB650C Custom - 1980-1981 - GEARSHIFT DRUM

1 Review Hide Reviews Show Reviews

  • 5
    Seal for gear shift

    Posted by Ricardo on 23rd Dec 2022

    Good fit for cb550 76