Goodridge Speed Bleeder - 7mm x 1.00

Goodridge speedbleeder for many of the Honda fours from the 70's. This simple bleeder turns a two person job into an easy one person job! Going back and fourth, opening and closing the bleeder valve while holding the lever can be quite awkward for one person. Make life easier with this modern high quality speed bleeder valve! Just attach a 3/16" hose with a catch can, open the valve 1/4 to 1/2 turn, then start pumping the brake lever until all air is bled from the system.

Dimensions: 7mm x 1.00 Thread Pitch - Overall Length 29.36mm

Sold Individually.

*NOTE: The lower threaded area of this bleeder valve is 4mm shorter than the original bleeder valve for the models listed below, it actually fits better than the original bleeder. The first time installing this bleeder valve it will feel tight, due to the threadlock coating that comes on the bleeder. Also any rust on the caliper threading can contribute to it feeling tight at first.

Not sure if your brake calilper is stock? Take look at our replica caliper!

Replaces Honda Part Number: 45224-579-013
Fits on Front Brake Caliper Body: 45101-323-013

Fits Honda:

CB350F - 1972-1974
CB350G - 1973
CB360K - 1974
CB360T - 1975-1976
CB360G - 1974
CB400F Super Sport - 1975-1977
CB450K - 1972-1974
CB500K - 1971-1973
CB500T - 1975-1976
CB550F Super Sport - 1975-1977
CB550K - 1974-1978
CB750A Hondamatic - 1976-1978
CB750F Super Sport - 1975-1976
CB750K - 1977-1978

and many others....