Reproduction Honda ignition coil. This coil replaces the stock style coil that came on many of Honda's SOHC CB's, it can be used on the left or right side. Use it with your points ignition or electronic ignition, it fits up just like the stock coils.
Sold individually. 2 are necessary for 4 cylinder models.
Specifications:
Spark plug wires are 17" long
Mounting holes are 102mm (4") apart. (measured from the center of each hole)
Low tension wires: 8" long - 1 male and 1 female bullet connector (power goes to the black/white line male terminal. points/condenser wire goes to the blue female terminal)
Primary Windings: 4.6 ohms +- 10% (just like the original coil)
Replaces Honda Part Numbers:
30510-333-013, 30520-333-013 (CB350F, CB400F)
30501-323-003, 30502-323-003 (CB500, CB550 up to '76)
30501-404-000, 30502-404-000 (CB550 '77-'78)
30501-300-003, 30502-300-003 (CB750)
Fits Honda:
CB350F Four - 1972-1974
CB400F Super Sport - 1975-1977
CB500K Four - 1971-1973
CB550F Super Sport - 1975-1977
CB550K Four - 1974-1978
CB750A Hondamatic - 1976-1978
CB750F Super Sport - 1975-1978
CB750K Four - 1969-1978
13 Reviews Hide Reviews Show Reviews
-
CB 350F runs great now
I replaced both coils on my 1972 cb350f with these reproduction coils. The bike is running great so far. The plug wires are extra long, which is good so you can trim them down and make them fit without too much slack touching the pipes or to little slack causing a stretch in the wires. The coil packs sit perfectly in the mounting holes of my bike. I had to use the original mounting screws since the new screws provided were too long, not a problem though. The only hiccup is the coil packs come with male bullet connectors at the ends of the small wires that connect to the wiring harness. My bike needed one male and one female so I had to cut off and crimp on a couple new female ends. Not a big deal in my opinion for a reproduction part that fits many different bikes.
-
Flawless Fit
I ordered a set of these for my cb 550 and had no problems what so ever for fitting or mounting. I have gone for a handful of rides already this season in all weather with these coils and still riding with no problems.
-
Replacement Coils for 73 Honda CB500K2
I initially ordered new replacement coils from a different vendor - unfortunately, I received coils for a Suzuki or Kawasaki - they didn't fit the stock brackets. Contacted 4into1 from their Ebay ad who provided me with excellent service. Only had 1 coil in stock (I needed 2) - said they would re-order and let me know. They kept me informed on the order status and immediately sent me the parts once they got them. The parts fit the stock brackets as noted. The best thing is since I am actually getting some significant fire to the plugs now, it has never ran better! The parts guy I worked with was excellent and I will definately use them again and let my friends know about too.
-
High-quality product, fast delivery. Thank you 4 into 1
High-quality product, fast delivery. Thank you 4 into 1
