Honda Motorcycle Fuel Valve Petcock - 16 x 1.5mm - #1

Honda Motorcycle Fuel Valve Petcock - 16 x 1.5mm - #1

$14.95
(32 reviews) Write a Review
Availability:
Ships in 24 hours
Adding to cart… The item has been added

Fuel valve / petcock for numerous Honda motorcycles, and many other brands of motorcycle, scooter and moped. Check the threading on your bike to be sure this is what you need before you buy. Many of the compatible models listed below used this 16 x 1.5mm petcock for part of the production run, then switched to a different size, sometimes in the same production year. We also have this 18 x 1.0mm petcock for some later models and other bikes.

On / Off / Reserve. Built in fuel filter. Fuel exits to the side. Comes with rubbery sealing washer for a tight fit with no leaks.

Threading = 16 x 1.5mm

22mm hex nut.

Ribbed fuel outlet perfect size for use with either 3/16" or 1/4" fuel line.

Replaces Honda part number: 16950-393-015

Will also work in place of Honda part numbers: 16950-410-015, 16950-388-015, 16950-388-005, 16950-447-015

Fits Honda:

MR175 - 1977
XL250S - 1978-1981
CB350K Twin - 1968-1973 (Stock petcock had 2 outlets)
CL350K Scrambler - 1968-1973 (Stock petcock had 2 outlets)
XL350 - 1977-1978
CJ360T - 1975-1976
CB400A Hondamatic - 1978
CB400T Hawk - 1980-1981
CB400TI Hawk I - 1978-1979
CB400TII Hawk II - 1978-1979
CM400A Hondamatic - 1979-1981
CM400C Custom - 1981
CM400E - 1980-1981
CM400T - 1979-1981
CB500T Twin DOHC - 1976
CX500 - 1978-1979
CB550F Super Sport - 1977 (check your tank first, '75-'76 tanks use a 20mm petcock)
CB550K - 1977-1978 (check your tank first, 75-76 tanks use a 20mm petcock)
CB750A Hondamatic - 1976-1978
CB750F Super Sport - 1977-1978 (Does not fit 1975 - 1976 CB750F F0)
CB750F Super Sport - 1979 (VIN# RC04-2000023 - RC04-2010669)
CB750F Super Sport - 1980 (VIN# RC04-2100003 - RC04-2116089)
CB750K - 1977-1978 (Does not fit 1975 K4 & 1976 K5)
CB900C Custom - 1980 (VIN# SC04-2000046 - SC04-2015593)

and many others . .

32 Reviews Hide Reviews Show Reviews

  • 4
    Nice

    Posted by Dp on 4th Feb 2016

    Bought this for a 1981 cm400c, works perfect

  • 3
    As they say in the product description - CHECK YOUR THREADS

    Posted by Bob on 26th Oct 2014

    I was about to order this for my 1977 400-4, but my threads measured 14mm diameter, so I ordered that size and it fits perfectly and flows OK on both positions. I expect these units are all sourced form the same manufacturer in the People's Republic, so I would think quality is OK for all. And Honda would want a small fortune for an OE petcock - if they stocked it, which they don't.

  • 5
    Just what I wanted

    Posted by Morgan on 23rd May 2014

    Fit perfectly on my 1978 CB 550K with no problem. Clearance between carbs and head a little tight but it works.

  • 5
    Fit a 79 Honda cx500 perfectly

    Posted by Fernando on 25th Oct 2013

    I'm still working on the overall bike and tank so I haven't tested it running but everything seems legit. Fit great and looks clean. This is a nice shiny petcock.

  • 5
    2nd petcock I've tried, great fit

    Posted by Unknown on 10th Sep 2013

    I ordered a replacement petcock for my 1978 CB550k and it leaked after a week. So far this thing is snug and tight and no leaks whatsoever.

!