2 pack forks seals from K&S Technologies for many Kawasaki Suzuki and Yamaha models listed. When replacing fork seals be very careful not to scratch or gouge the aluminum during the removal of the old seals. Use a fork seal driver to install the new seals or use the old seal to help drive in the new seal. Be sure to drive it in evenly and make sure it fully seats so the snap ring can be installed. If you're unsure if your forks are stock please check the fork seal dimensions.
When it comes to rubber parts and seals it's generally better to install a brand new part instead of using a NOS part which has hardened due to age.
Note: Clean everything thoroughly and install the new seal with a deep socket with the same outer diameter as the seal or a seal driver. Make sure to push it in evenly.
Dimensions: 38 x 50 x 8
Replaces Kawasaki Part Numbers: 92049-1295, 92049-1178
Replaces Suzuki Part Numbers: 51153-20A00
Replaces Yamaha Part Numbers: 3EN-23145-00-00
Fits Kawasaki:
KZ1000A/J - 1981-1983
KZ1000B/K LTD - 1981-1982
KZ1000C/P Police - 1982-2001
KZ1000M CSR - 1981-1982
KZ1000R Lawson Replica - 1982-1983
KZ1100A - 1981-1983
KZ1100B GPZ - 1981-1982
KZ1100D Spectre - 1982-1983
KZ1100L LTD Shaft - 1983
ZN1100B LTD - 1984-1985
ZX600 Ninja 600R - 1988-1997
ZX750F Ninja 750R - 1987-1990
ZX900 Ninja - 1984-1986
Fits Suzuki:
LS650 Savage - 1986-1988, 1995-2003
S40 Boulevard - 2005-2008, 2011-2017
Fits Yamaha:
FZR400 - 1988-1990
FZR600R - 1989-1997
IT175 - 1982-1983
IT250 - 1981-1982
IT465 - 1981-1982
XJ600S Seca II - 1992-1997
XJ700 Maxim - 1985
XJ700X Maxim X - 1985
XT550 - 1982-1983
XV1000 Virago - 1984-1985
XV1100 Virago - 1986-1997
XV700 Virago - 1984-1987
XV750 Virago - 1988-1997
YZ125 - 1981-1985
YZ250 - 1977-1980
YZ400 - 1977-1979
YZ465 - 1980
