Motion Pro Control Cable Set - Honda CB350K Twin

Motion Pro control cable set for the Honda CB350K twin check the fitment list below. We put this cable set together to make finding parts a bit easier. Usually it is a good idea to replace all of the control cables if you recently purchased a vintage Honda. The riding experience can be vastly improved with fresh control cables, especially if your bike is still running the stock cables or old stiff cables. Always lubricate new cables prior to installation. We carry a cable lube tool and cable lubricant to make life easier.

• Manufactured to exact measurements to meet or exceed OEM specification
• Tempered steel wire housing with an inner nylon sleeve for long life and smooth operation
• This premium cable features longitudinal wound wire housing embedded in polyurethane with a nylon lining to eliminate spring or compression
• A stainless inner wire resists corrosion allowing longer, smoother operation

Cable Dimensions:

Throttle Cable: 42.75" Total Length - 41.25" Housing - 1.5" Slack
Front Brake Cable: 48.13" Total Length - 44.5" Housing - 3.13" Slack
Clutch Cable: 52.625" Total Length - 47.125" Housing - 3.125" Slack

Motion Pro part number: 02-0002 (front brake), 02-0000 (throttle), 02-0001 (clutch)

*Note: This cable is designed for use with the stock handlebars, please check the measurements listed above.

*Note: Early CB350, CL350, CL450 and CB450 models have the brake light switch built into the cable assembly. To work around this, replace the lower half of the right side switch assembly with one from a later production bike that's designed for the handlebar mounted switch. Or replace the complete assembly.

Fits Honda:

CB350K - 1968-1973