Piston Ring Set - Standard - 13011-391-004 - Honda XL175K CB/CL/SL350K

Standard piston ring set for the stock bore Honda XL175 and CB/CL/SL350K twins. If you're just freshening up your top end and having the cylinders honed, install a fresh set of rings to ensure a tight fit. Make sure the Letter stamped on the top two rings are facing up when installing them and stagger the ring gaps according to the manual.

Set comes with 4 rings and the oil ring spacer. Sold individually, so you will need 2 sets per bike.

Features:

• Ductile Iron Casting (FCD) is superior to OEM rings which were sometimes made from steel.
• Superior tensile strength, ductility and elongation compared to steel rings.
• FCD is even stronger than regular cast iron.
• FCD is used in many automotive parts, which require strength and durability.

Be very careful when installing the cylinder over new rings, it's helpful to have the proper tool to keep the rings compressed as you lower the cylinder over the pistons. Try to use only plastic tipped tools to prevent from scratching aluminum surfaces.

Replaces Honda Part Number: 13011-391-004

Ring Order:

Top Compression Ring (silver outer rim)
Second Ring (black outer rim)
Bottom Rings (3 pieces - Spacer in the middle - 1 thin ring on either side)

Fits Honda:

XL175K - 1973-1978
CB350G - 1973
CB350K - 1968-1973
CL350K Scrambler - 1968-1973
SL350K - 1969-1973