Reproduction Banjo Bolt - 90145-300-010 - Honda CB350/360/400F/450/500/550/750/900 CBX GL1000/1100/1200

Reproduction Honda banjo bolt. This bolt is used on most Honda CB's from the 70's and early 80's with disc brakes. For use on front and rear brake master cylinders. It connects the brake hose to the master cylinder and it's always used with a crush washer on both sides. It is also used to connect the upper and lower lines to the 3 way joint under the headlight. Many models use a total of 3 banjo bolts.

Make sure to replace the crush washers when installing a new bolt, torque it down to spec, and proceed to bleed the brakes. This bolt is zinc plated steel like the original Honda part but the zinc plating is not the same color as the original part.

Sold Individually. Crush washers sold separately.

Thread size: M10 x 1.25
Zinc Plated Steel

Replaces Honda Part Number: 90145-300-010

Fits Honda:

CB350F - 1972-1974
CB350G - 1973
CB360T - 1975-1976
CB360G - 1974
CB400A Hawk Hondamatic - 1978
CB400F Super Sport - 1975-1977
CB400T Hawk - 1980-1981
CB400TII Hawk II - 1978-1979
CB450K - 1970-1974
CB450SC Nighthawk - 1982-1983
CB450T Hawk - 1982
CB500K - 1971-1973
CB500T Twin DOHC - 1975-1976
GL500 Silver Wing - 1981-1982
GL500I Silver Wing Interstate - 1981-1982
CB550F Super Sport - 1975-1976
CB550K - 1974-1978
CB550SC Nighthawk - 1983
CB650 - 1979-1982
CB650C Custom - 1980-1981
CB650SC Nighthawk - 1982
GL650 Silver Wing - 1983
GL650I Silver Wing Interstate - 1983
CB750A Hondamatic - 1976-1978
CB750C Custom - 1980-1982
CB750F Super Sport - 1975-1982
CB750K - 1969-1982
CB750L Limited - 1979
CB750SC Nighthawk 750 - 1982-1983
CB900C Custom - 1980-1982
CB900F Super Sport - 1981-1982
CB1000C Custom - 1983
CBX - 1979-1982
GL1000 Gold Wing - 1975-1979
GL1100 Gold Wing - 1980-1983
GL1100A Gold Wing Aspencade - 1982-1983
GL1100I Gold Wing Interstate - 1980-1983
GL1200 Gold Wing - 1984
GL1200A Gold Wing Aspencade - 1984
GL1200I Gold Wing Interstate - 1984

and many others....