Reproduction chrome rear shocks for vintage Honda's from the 70's. These have 5 step preload adjusters just like the stock ones. Lower clevis type mount is threaded for M10 bolts. Upper eye mount already has the 14.5mm rubber bushing installed. These can be used on many of the Honda CB's and custom bikes! Remove one shock at a time and you can replace those rusty old shocks in minutes! These shocks are reproductions for the models listed below. They might fit on other years of the CB/CL/CJ360 as well as many other years and models, please check the dimensions below.
Sold as a pair.
NOTE: Please measure your existing shocks prior to ordering so you know they'll work with your application. These shocks may need a washer on both sides of the bushing if there is any free play after flange nut is installed.
Replaces Honda Part Number: 52400-375-611, 52400-375-000, 52400-404-013
Dimensions:
Length: 321mm (12 5/8") measured from center of mounting points.
Diameter of springs = 52mm (2")
Overall Length = 13 7/8"
Inner diameter of upper rubber bushing = 14.5mm
Threaded Mounting Hole: M10
Distance between clevis: 19.2mm
Fits Honda:
CB350F Four - 1972-1974
CB350G - 1973
CB350K - 1968-1973
CL350K Scrambler - 1968-1973 (with early model pipes "black cover")
SL350K Motosport - 1969-1973
CB360G - 1974
CB360K - 1974
CB360T - 1975-1976
CJ360T - 1976-1977
CL360 Scrambler - 1974-1975
CB400F Super Sport - 1975-1977
CM400A Hondamatic - 1979-1981
CM400C Custom - 1981
CM400E - 1980-1981
CM400T - 1979-1981
CB450K Super Sport - 1968-1974
CL450K Scrambler - 1968-1974
CM450A Hondamatic - 1982-1983
CM450C Custom - 1982
CM450E - 1982-1983
CB500K Four - 1971-1973
CB500T Twin DOHC - 1975-1976
CB550K Four - 1974-1978
CB550F Super Sport - 1975-1977
CB650 - 1979-1982
CB650C Custom - 1980-1981
CB700SC Nighthawk S - 1984-1986
CB750A Automatic - 1976-1978
CB750C Custom - 1980-1982
CB750F Super Sport - 1975-1978
CB750K Four - 1969-1978
CB750SC Nighthawk 1982-1983
2 Reviews Hide Reviews Show Reviews
-
Great replacements for OEM shocks on '77 CB400F
I bought a pair of these for my '77 CB400F. The original shocks had lost all dampening, and I had to set the spring preload to the lowest level to avoid being bounced off the bike. Handling was poor. After installing these reproduction units, dampening is back, and they work just great. The bike handles like a dream now. And it doesn't hurt that the price is right.
-
Good Value, Also Fit CB77 SuperHawk
These shocks are a little stiffer than the original shocks and springs on my SuperHawk. I removed the spring covers from the originals and managed to fit them to the new shocks, using the old springs. They look good, and I'm sure will last quite a while.
