Reproduction Chrome Shocks - Eye / Clevis - 330mm (13") - Honda CB750

Reproduction chrome rear shocks for the Honda CB750 SOHC's. These have 5 step preload adjusters just like the stock ones. Lower clevis type mount is threaded for M10 bolts. Upper eye mount already has the 14.5mm rubber bushing installed. These can be used on many of the Honda CB's and custom bikes, just measure your current shocks first! These shocks are replicas for the models listed below. Remove one shock at a time and you can replace those rusty old shocks in minutes!

Sold as a pair.

NOTE: Please measure your existing shocks prior to ordering so you know they'll work with your application. These shocks may need a washer on both sides of the bushing if there is any free play after flange nut is installed.

Replaces Honda Part Number: 52400-300-010XW, 52400-341-000XW, 52400-341-911XW, 52400-341-670XW
Also Replace these Honda Part numbers, but these originally didn't have an upper chrome shroud: 52400-392-003, 52400-410-000, 52400-410-013, 52400-405-013

Dimensions:

Length: 330mm (13") measured from center of mounting points.
Diameter of springs = 52mm (2")
Overall Length = 14"
Inner diameter of upper rubber bushing = 14.5mm
Threaded Mounting Hole: M10
Chrome cover length: 113.5mm (4.5")
Chrome cover OD: 63mm (2.5")
Distance between clevis: 19.2mm

Fits Honda:

CB750K - 1969-1978
CB750F - 1975-1978

and others . . .