Reproduction Honda turn signal / horn switch assembly for several Honda CB's. It's installed on the left side of the handlebars. It's common for the stock switches to wear and corrode from decades of use. Sometimes the horn button breaks or the turn signal switch no longer clicks into place. This is an easy part to replace if your wires aren't running through the handlebars, if they are, it requires removing the handlebars and feeding the wires through. A horn and turn signals are great safety features to have working!
This is a high quality replica part, ready for many years of everyday use. If you are running aftermarket handlebars check to make sure the 32" wire harness is long enough. It does not have a locator pin like the original switch, but it will still clamp around the handlebar and stay in place. This means you won't have to drill a hole in aftermarket handlebars! The switch is designed so you can run the wires inside the bars or outside.
This switch assembly will fit on many of the Honda CB's, check your wiring harness and make sure the connectors will work or you can replace the bullet connectors with connectors that match your harness.
- Wire harness is 32" long
- 4 Male Bullet connectors - green, blue, grey and orange
Honda Part Number: 35250-300-033
Fits Honda:
CB175K - 1971-1973
CL175K Scrambler - 1971-1973
CB200K - 1974
CL200K Scrambler - 1974
CB350F - 1972-1974
CB350G - 1973
CB350K - 1970-1973
CL350K Scrambler - 1970-1973
CB450K - 1970-1974
CL450K Scrambler - 1970-1974
CB500K - 1971-1973
CB750K - 1969-1971
18 Reviews Hide Reviews Show Reviews
-
worked
part not like pictured some modification and it worked
-
Great Quality
Just as good as the original, well priced and arrived in New Zealand in a week.
-
Good Quality
I was pretty impressed with the quality of this switch assembly. I recommend these reproduction controls.
-
Handlebar switch cb 750
good product
-
HOnda turn signal
my friend says it worked perfectly on his bike
-
Good replacement.
Used on a little Honda S90. Exactly what I needed. Matte black finish is attractive. The turn signal switch is a little wonky but it gets the job done. The wiring harness was a good match for my set-up. Not sure why a previous reviewer thought there should be a high/low switch here as there is clearly not one in the picture.
-
perfect fit
Perfect fit, cheaper than original
-
Just what I needed.
Replaced a broke turn signal switch on my CB350F with this one. Fit perfect, works perfect. Looks great.
-
Good Replacement
This is a good replacement. It is obviously not better than NOS but for the price you pay you can not beat it. The turn signal switch and horn button feel solid.
