Reproduction Keihin 2.0 Float Needle Valve Assembly - 16011-375-004

Reproduction Keihin 2.0 float needle valve assembly. These come in different sizes, 1.8mm, this 2.0mm, and 2.5mm. Be sure to check what size you need before purchase. 2.0 is the most common size. Comes with the metal washer and the float needle. When installing a new float needle and seat be sure to check the float height before reassembling the carburetor.

Equivalent to Honda part numbers: 16011-375-004, 16011-302-004

Note: This valve assembly needs to be installed as a set. The needle and the valve can not be used separately on the stock carburetor parts, it is important to match these parts to ensure the needle will make proper contact to cut off the fuel.

Fits Honda:

CB100K - 1970-1972
CL100K Scrambler - 1970-1972
CL100S Scrambler - 1971-1973
SL100K - 1970-1973
XL100 - 1974-1976
CB125S - 1973-1976
SL125K - 1971-1973
XL125K - 1974-1976
CA95 Benly Touring 150 (early) - 1959-1963
XL175K - 1973-1978
CA175 Touring - 1969-1970
CA72 Dream Touring 250 (early) - 1960-1963
CB72 Hawk 250 - 1961-1966
CL72 Scrambler 250 - 1962-1965
CA77 Dream Touring 305 (early) - 1960-1963
CB77 Super Hawk 305 - 1961-1968
CL77 Scrambler - 1965-1968
CB450K - 1965-1974
CL450K Scrambler - 1968-1974
CB500T - 1975-1976
CB750K - 1969-1975

and others. . .