Reproduction left side switch assembly for the CB360T and CB400F. This assembly is the European version, which looks different from the US version, but retains the same functionality. It's common for the turn signal switch to crack and break. Corrosion and cracked solder joints on the stock switch make for an unreliable and unsafe switch! Pick up a new one and ride with confidence!
There is a locator pin built into the switch like the stock ones, if you're using aftermarket handlebars, just drill a hole in the bars before mounting the switch.
This switch assembly will fit on many of the Honda CB's, check your wiring harness and make sure the connectors will work or you can replace the bullet connectors with connectors that match your harness.
- Wire harness is 33" long. (measured to the end of the shortest wire)
- 8 Male Bullet connectors - orange, light blue, black/yellow line, light green, grey, black, white, blue
- Horn, high & low beam, L & R turn signal functions
- Threaded hole for 10mm mirror
- Has a hole for the stop switch
Honda Part Number: 35200-377-003 (EUROPE), 35200-377-671 (USA)
We also carry the Genuine Honda right side switch assembly.
Fits Honda:
CB360T - 1975-1976
CL360K Scrambler - 1975
CB400F Super Sport - 1975-1977
and can be used on many other bikes.
2 Reviews Hide Reviews Show Reviews
-
Good product but..
my original switch had 9 wires. This one has 8 wires.
-
Worked On A CB500T
Used this switch on a CB500T. Required a bit of rewiring but overall worked very well and I now have the high beam flash to pass capability. Nice piece.
