Set of 2 - Fork Seals - 31X43X10 - Honda SL/XL100 CR/CT/MT/SL/TL/XL125 CB/CL/MR/SL/XL175 CM/XL185 CB/CL/CM/200 CB250

Set of 2 fork seals for many of the small Honda 125/175/200cc models from the 70's as well as other makes. When replacing fork seals be very careful not to scratch or gouge the aluminum during the removal of the old seals. Use a fork seal driver to install the new seals or use the old seal to help drive in the new seal. Be sure to drive it in evenly and make sure it fully seats so the snap ring can be installed. If you're unsure if your forks are stock please check the fork seal dimensions.

This is a high quality new seal produced in Taiwan. When it comes to rubber parts and seals it's generally better to install a brand new part instead of using a NOS part which has hardened due to age.

Clean everything thoroughly and install the new seal with a deep socket with the same outer diameter as the seal or a seal driver. Make sure to push it in evenly.

Replaces Honda part numbers: 91255-110-003, 91255-110-005, 91255-331-670, 91255-446-003. 91255-446-013, 91255-GAA-003
Replaces Kawasaki part number: 92049-1080
Dimensions: 31 X 43 X 10 (also replaces 31 X 43 X 10.2)
Material: NBR (Nitrile)

Fits Honda:

CR80R - 1982 - VIN# JH2HE020-CK200015 TO JH2HE020-CK205311
SL100K - 1972-1973
XL100K - 1974-1978
XL100S - 1979-1980
CB125TT - 1990
CR125M - 1974-1975
CT125 Trail - 1977
MT125 Elsinore - 1974-1976
SL125 Motosport - 1971-1973
TL125 Trials - 1973-1976
XL125K - 1974-1978
XL125S - 1979-1984
CB175K - 1973
CL175K Scrambler - 1973
MR175 Elsinore - 1975-1977
SL175 Motosport - 1970-1971
XL175K - 1973-1978
CM185T Twinstar - 1978-1979
XL185S - 1979-1983
CB200K - 1974
CB200T - 1975-1976
CL200 Scrambler - 1974
CM200T Twinstar - 1980-1982
TR200 Fatcat - 1986-1987
CB250 Nighthawk - 1991-2007

Fits Kawasaki:

KX80C2 - 1982
KE125A9/A10 - 1982-1983
KZ250L/W CSR, LTD - 1982
EX305B1 GPz - 1983

Fits Suzuki:

SP100 - 1983