Set of 2 reproduction front brake caliper rebuild kit for the Honda models listed.
Stock calipers have a tendency to become corroded and the piston can seize inside the caliper. If you're rebuilding your front caliper it might be time for a fresh rebuild kit, especially if the original piston is pitted. Ride safe and brake with confidence!
Kit Includes:
Piston x4: 45107-MA3-006 - Diameter 30mm / Height 35mm
Piston Seal x4
Piston Dust Seal x4
Pin Boot A x4
Pin Boot B x2
Bleeder Cap x2
Installation Tips:
Make sure to thoroughly clean the channel in the caliper that holds the seal, if there is any built up grease or dirt it will not allow the seal to sit properly which will affect the pistons ability to engage and retract.
The darker side of the piston with the indented ridge faces the brake pad.
Use brake grease between the piston and the pad but do not allow any grease or brake fluid to come in contact with brake pads. (this kit does not come with pads)
Fits Honda:
CX500TC Turbo - 1982 - Front (1 set needed)
GL500I Silver Wing Interstate - 1981-1982 - Front (1 set needed)
VF500F Interceptor - 1984-1986 - Front (1 set needed)
CB650SC Nighthawk - 1983-1985 - Front (1 set needed)
GL650 Silver Wing - 1983 - Front (1 set needed)
GL650I Silver Wing Interstate - 1983 - Front (1 set needed)
VF700C Magna - 1984-1986 - Front (1 set needed)
VF700S Sabre - 1984-1985 - Front (1 set needed)
CB750F Super Sport - 1981-1982 - Front (1 set needed)
CB750SC Nighthawk - 1982-1983 - Front (1 set needed)
VF750C V45 Magna - 1982-1983 - Front (1 set needed)
CB900C Custom - 1982 - Front (1 set needed)
CB900F Super Sport - 1981-1982 - Front (1 set needed)
CB1000C Custom - 1983 - Front (1 set needed)
CBX Super Sport - 1981-1982 - Front (1 set needed)
GL1100 Gold Wing - 1982 - Front (1 set needed)
GL1100A Gold Wing Aspencade - 1982 - Front (1 set needed)
GL1100I Gold Wing Interstate - 1982 - Front (1 set needed)
VT1100C Shadow - 1985-1990 - Front (1 set needed)
