Set of 4 Black Performance Oval Pod Filters - 54mm - Honda CB650/750/900/1000/1100

$75.95
(1 review) Write a Review
Availability:
Ships in 24 hours
Adding to cart… The item has been added

Tapered oval performance pod filter in black. Fits many late 70's and early 80's Honda's as well as other models, see dimensions below. Sold as a set of 4. This filter is also available in chrome.

Features

  • Flexible rubber molded flange instead of the 2 piece design like many pod filters.
  • Flange design has no step so it does not block important openings on the carburetor intake.
  • Tighter, more streamline fit without any risk of vibration causing the air filter to move independently while attached to the carburetors.

Keep in mind, for the bike to run smoothly, you may need to install larger jets and make other adjustments to match the higher air flow. The rubber mounts are flexible and can be mounted on 53mm and 55mm carburetor flanges.

IMPORTANT: Be sure to measure your carburetor prior to purchase. Also measure how much room you have between the carburetor and the frame or any side covers. Use the dimensions below to see if these will work on your bike. Just because the filters fit the carbs doesn't mean they'll fit in the bike without some obstruction. Some carburetors have very tight spacing which will not allow for a 73mm wide pod filter to fit side by side.

Dimensions:

54mm ID where it mounts to the carburetors
70mm Air filter length
86mm Total length including rubber
73mm Width of oval
104mm Height of oval

Fitment note: Honda changed from mechanical to CV carburetors on the CB650. CV carburetors have a tight spacing that may not work with these pods, see measurements above.

Fits Honda:

CB650 - 1981-1982 - Mechanical carbs / does not fit CV carbs
CB650 Custom - 1981 - Mechanical carbs / does not fit CV carbs
CB650SC Nighthawk - 1982 - Mechanical carbs / does not fit CV carbs
GL650I Silver Wing Interstate - 1983
CB750C Custom - 1980-1982
CB750F Super Sport - 1979-1982
CB750K - 1979-1982
CB750K Limited Edition - 1979
CB750SC Nighthawk - 1982-1983
CB900C Custom - 1980-1982
CB900F Super Sport - 1981-1982
CB1000C Custom - 1983
CBX Super Sport - 1979-1982
CB1100F Super Sport - 1983

Fits Kawasaki:

KZ1000A/J - 1981-1983
KZ1000B/K LTD - 1981-1982
KZ1000C/P Police - 1982-1999
KZ1000M CSR - 1981-1982
KZ1000R Lawson Replica - 1982-1983
KZ1100A - 1981-1983
KZ1100B GPZ - 1981-1982
KZ1100D Spectre - 1982-1983
KZ1100L LTD Shaft - 1983
KZ1300 - 1981-1982
KZ750B/E - 1980-1982
KZ750H LTD - 1980-1983
KZ750L - 1983
KZ750N Spectre - 1982-1983
ZL1000 Eliminator - 1987
ZN1100B LTD - 1984-1985
ZX550 GPZ - 1984-1985
ZX750 GPZ - 1982-1985

Fits Suzuki:

1985-1986 GS700
1985 GS750E,
1980-1985 GS750
1983 GS750E
1983 GS750ES
1979-1983 GS850G
1980-1983 GS850GL
1983-1986 GS1150E
1983 GS1100S
1980 GS1100L
1982-1984 GS1100GK
1982-1983 GS1100G
1980-1983 GS1100E
1980-1982 GS1000S
1980-1981 GS1000GL
1980-1981 GS1000G

Fits Yamaha:

SR500 - 1978-1981
XJ650 Maxim - 1980-1983
XJ650L Turbo Seca - 1981-1983
XJ650R Seca - 1982
XJ900 Seca - 1983
XS1100 - 1978-1981
XS1100L Mid-Special - 1980-1981
XS1100S Special - 1979-1981
XS750 - 1977-1979
XS750S - 1978-1979
XS850 - 1980-1981
XS850L Mid-Special - 1980-1981
XS850S Special - 1980-1981
XT500 - 1976-1981

NOTE: Fits other model bikes as well. Check your carburetor flange diameter before purchase.

1 Review Hide Reviews Show Reviews

  • 5
    Good quality high air flow

    Posted by Dylan E on 1st Aug 2024

    I used one of these on a modified BMW K100 bike with a 3D printed adapter. No issues with airflow even with all four cylinders using only one air filter. Quality looks great, includes a nice worm clamp.