45mm Chrome tapered pod filter for the Honda CB750 PD carburetors starting in 1977 and other models. Sold as a set of 4.
Keep in mind, for the bike to run smoothly, you may need to install larger jets and make other adjustments to match the higher air flow. The rubber mounts are flexible and can be mounted on 44mm and 46mm carburetor flanges.
IMPORTANT: Be sure to measure your carburetor prior to purchase. Also measure how much room you have between the carburetor and the frame or any side covers. Use the dimensions below to see if these will work on your bike. Just because the filters fit the carbs doesn't mean they'll fit in the bike without some obstruction.
Dimensions:
45mm ID where it mounts to the carburetors
68mm Air filter length
88mm Total length including rubber
74mm Outer Diameter of air filter
Fits Honda:
CB750A Automatic - 1977-1978
CB750F Super Sport - 1977-1978
CB750K - 1977-1978
and others . . .
3 Reviews Hide Reviews Show Reviews
-
CHROME POD FILTERS - 45MM
Worked on my 1980 cb650c with some modification, nearly lost a finger in the process but great nonetheless ?
-
air filter pods
looks good, a little tricky to clamp them without them slipping off....remains to be seen how they filter and last.
-
Fits my cb750
These fit my cb750 78. The # 2 Carb (throttle cable attachments) rub a bit on the pod but with a 1mm move you can get the podz to fit fine. Not sure what the filter material is or if it is just a screen filter. The k&N have a cotton fill, not sure of these. Working fine so far, problem is, you only really know if they are doing the job after you take the motor apart 10k km later and see.
