UNI high flow foam air filter pod set for Honda CB350, CB450 and others. This is a great replacement for the stock paper filter, sometimes they look clean but if they are 40 years old they probably aren't providing the proper airflow. These filters are 6 3/4" long.
- Includes 2 air filters.
- Washable.
- Comes with 2 stainless steel mounting clamps.
- Charcoal colored filter element.
- Includes washers and spacers to use the stock bolt for the side covers.
- Adaptable between 1 1/2" - 2" (38mm-52mm) ID for universal use on many carburetors
Keep in mind, for the bike to run smoothly, you may need to install larger jets and make other adjustments to match the higher air flow from these filters.
These filters need to be oiled. We have the oil available here.
NOTE: Be sure to oil the filter prior to installation.
IMPORTANT: Be sure to measure your carburetor prior to purchase. Also measure how much room you have between the carburetor and the frame or any side covers. Use the dimensions below to see if these will work on your bike. Just because the filters fit the carbs doesn't mean they'll fit in the bike without some obstruction.
Replaces Honda OEM Part Number: 17210-310-000, 17311-346-671, 17211-375-000
UNI Part Number: NU-4001
Made in the USA.
Dimensions:
52mm (2") ID where it mounts to the carburetors
146mm (5.75") air filter total length
171.45mm (6.75") total length including rubber
72.5mm (2.85") outer diameter of the filter
Fits Honda:
CB350K Super Sport - 1968-1973
CB350G Super Sport - 1973
CL350K Scrambler - 1968-1973
CB360K- 1974
CB360G - 1974
CB360T - 1975-1976
CL360K Scrambler - 1974-1975
CB450K Super Sport - 1965-1974
CL450K Scrambler - 1968-1974
CB500T Twin DOHC - 1975-1976
Fits Kawasaki:
KZ250
KZ400B/G/L
ZR400
KZ440A/C/D/H
KZ550G/H
GPZ550
ZR550
KZ650H2 H3 (not H1)
Fits Suzuki:
GS400/S
GSX400E/F/L
GT500
GS550E/M
GT750
Fits Yamaha:
SR500
XT500
XJ650
XS750
XS850
XJ900
XS1100
NOTE: Fits other model bikes as well. Check your carburetor flange diameter before purchase.
2 Reviews Hide Reviews Show Reviews
-
Excellent alternative to factory air filters much easier to use and maintenance
I bought these to compliment a custom exhaust installed on my 1972 cl350, these mounted easily and quickly with the supplied hardware and worked perfectly requiring no additional jetting
-
Recommend for CB350 Twin
Great stock replacement for my 72' CB350 Twin. Bolted right up to the stock CV's and came with the necessary hardware to adapt for use with stock sidecovers. Don't come pre-oiled from the factory, so slightly disappointing there.
