Reproduction front or rear brake caliper rebuild kit for the Yamaha models listed. Replace the piston seal when replacing your piston or after cleaning the stock piston. Forms a tight seal to prevent brake fluid from seeping past the piston.
Note: Some models changed brake calipers during their production run, double check the fitment list and piston dimensions.
Kit Includes:
Piston x1
Piston Seal x1
Piston Dust Seal x1
Dust Seal Clip x1
Bleeder Cap x1
Piston Specifications:
Material: Nickel plated carbon steel
Diameter: 38mm
Overall Height: 41mm
Height of top section: 8mm
Groove: 4mm
Diameter of top: 35mm
Installation Tips:
Make sure to thoroughly clean the channel in the caliper that holds the seal, if there is any built up grease or dirt it will not allow the seal to sit properly which will affect the pistons ability to engage and retract.
The darker side of the piston with the indented ridge faces the brake pad.
Use brake grease between the piston and the pad but do not allow any grease or brake fluid to come in contact with brake pads. (this kit does not come with pads)
Replacement for Yamaha Part Numbers: 2G2-W0047-00-00, 1J3-W0047-00-00, 1L9-25810-03-00
Fits Yamaha:
SR500 - 1978-1981 - Front (1 Needed)
XJ650R Seca - 1982 - Front (2 Needed)
XS400 - 1977-1979 - Front (1 Needed) - Rear (1 Needed)
XS500 - 1976-1977 - Front (1 Needed) - Rear (1 Needed)
XS650 - 1977-1981 - Front (1 Needed) - Rear (1 Needed)
XS650S Special - 1982-1983 - Front (1 Needed) - Rear (1 Needed)
XS750 - 1977-1979 - Front (2 Needed) - Rear (1 Needed) - Double check piston dimensions - more than 1 size was used
XS750S - 1978-1979 - Front (2 Needed) - Rear (1 Needed) - Double check piston dimensions - more than 1 size was used
XS850 - 1980-1981 - Front (2 Needed) - Rear (1 Needed) - Double check piston dimensions - more than 1 size was used
XS850L Mid-Special - 1980-1981 - Front (2 Needed) - Rear (1 Needed) - Double check piston dimensions - more than 1 size was used
XS850S Special - 1980-1981 - Front (2 Needed) - Rear (1 Needed) - Double check piston dimensions - more than 1 size was used
XV920R Seca - 1981-1982 - Front (2 Needed)
XS1100 - 1978-1981 - Front (2 Needed) - Rear (1 Needed) - Double check piston dimensions - more than 1 size was used
XS1100L Mid-Special - 1980-1981 - Front (2 Needed) - Rear (1 Needed) - Double check piston dimensions - more than 1 size was used
XS1100S Special - 1979-1981 - Front (2 Needed) - Rear (1 Needed) - Double check piston dimensions - more than 1 size was used