Electronic ignition system for the Honda CB350F and CB400F four cylinder models. Tired of adjusting and replacing points and condensers? Install an electronic ignition to eliminate the entire points and condensers assembly. This electronic ignition comes with an aluminum rotor that replaces the stock rotor on the spark advancer. The stock spark advancer is still used, just the rotor is replaced. The ignition plugs into the stock wiring harness with no wiring modifications.
Use your stock coils, or aftermarket coils.
Comes with ignition trigger plate, aluminum rotor and a 1 year warranty.
Please read the installation instructions prior to purchasing if you're planning to install this yourself. You can view them here.
Note: If you have a CB400F check the diameter of the advancer shaft. Some of the later CB400F bikes used larger CB750 size advancers. Check whether the advancer shaft diameter is the early style 13.5mm (.530") or the later style 15mm (.590") This kit includes the 13.5mm rotor. If you find you have the larger size you can purchase the ignition for the 500/550/750 models here.
Other Parts You Might Need:
Points cover gasket - if yours needs to be replaced.
Spark Plug Caps - It is recommended to use 5 ohm resistor type spark plug caps or resistor type plugs (not both) - all the NGK caps we carry are 5 ohm resistor type caps.
Fits Honda:
CB350F Super Sport - 1972-1974
CB400F Super Sport - 1975-1977
