Front brake caliper kit for many of the Honda 350-550 models from the 70's. Comes with everything shown in the photo as well as the plastic ring that goes between the brake pad and the piston. Be sure to coat the piston and piston seal with brake fluid or an equivalent lubricant before installing them. We have DOT4 brake fluid available. We also carry a complete caliper assembly if you need all the parts.
This presents a solution to these questions...."what do I do if my piston is heavily pitted and so is the inside of my caliper?" or "my pads are toast, my bleeder valve is seized and so is my piston!" Yes, some of us just start cleaning, soaking and scrubbing all the parts and replace individual parts such as the piston, seal and bleeder valve but if you want your caliper looking and working like new and you want to save a lot of time, get the complete caliper. Finish the job in minutes rather than hours!
Kit Includes:
1 - Bleeder Cap
1 - Steel Piston
1 - Bleeder Valve
1 - Piston Seal
1 - Pad A
1 - Pad B
1 - Caliper A
1 - Cotter Pin
2 - Mounting Bolts
2 - Washers For Mounting Bolts
Fits Honda:
CB350F Four - 1972-1974
CB350G - 1973
CB360 - 1974
CB360G - 1974
CB360T - 1975-1976
CB400F Super Sport - 1975-1977
CB450K Super Sport - 1972-1974
CB500T DOHC Twin - 1975-1976
CB500K Four - 1971-1973
CB550F Super Sport- 1975-1977
CB550K Four - 1974-1978
10 Reviews Hide Reviews Show Reviews
-
Front Brake Caliper Kit w/Pads - Honda CB400F
Good deal to replace an old stuck unit. All fit well and bolted right up. Much more original looking than the other cheaper units available.
-
Brake Caliper kit
This very easy to work with and everything fit perfectly. No leaks!
-
Inspect carefully prior to assemby
Looks right, fits, and would work if the factory had drilled the hole from the inside over to the bleeder screw. We had to do that ourselves, after discovering nothing was coming out the bleed screw, thanks to the factory missing a step. Returning it would have been a huge waste of time, and we own a drill, so we repaired it instead.
-
Front brake Caliper Kit
My caliper had some pitting and I had previously rebuilt it but it continued to corrode. I bought this kit and it had everything I needed in one bag. OEM quality and easy install. I bought the carb kits previously and I really like the quality from4into1. This is where I shop for my unmolested 75 CB400F.
-
Awesome kit.
I really like this kit. Easy to install and looks great. Installed on my 73' cb350f.
-
Right parts, right fit, excellent quality
Decided to do a rebuild which really was a replacement since only the back plate wasn't in included. Parts all match and work great. I'm happy with the results.
-
Great product
Installed in my 1977 CB550K, worked great!
-
Great Replacement Kit!
Restoring a '74 CB350F. The bike had a lot of corrosion on a number of surfaces. The front caliper was no exception. The original cylinder was beyond reclaiming, so I opted to go with this kit. So glad I did! Fit and finish are perfect and the kit is a great value and contains all the critical parts needed.
-
Frt caliper kit for 350f
This kit was perfect! Great value
