Locking Connector - 6.3mm - .250" Series - 6 Pin

6 Pin latching / locking type 6.3mm - .250 series connector. We sell these individually or purchase matching male and female connectors. This connector is commonly used for voltage regulator and rectifier connections on many vintage Japanese motorcycles. If your original plastic connectors are falling apart replace them before the problem gets worse! Check your wiring harness to make sure the this plug matches, it's common for electrical parts to be replaced with non stock parts.

The terminals fit (.8 - 2 mm) 14-18 AWG wire.

Options:

• Single Male Connector
• Single Female Flange Type Connector
• Both Male and Female Connectors (Female is Flange type)

There is a special crimping tool that's necessary for proper installation, you can use pliers but it isn't recommended. We have the crimping tool available separately.

We also carry a complete set with the spade terminals here.

This is the same type connector that's used on the Rick's 10-100 regulator / rectifier unit, and many other reg/rec units.

Replaces the stock Rectifier connection on Honda SOHC motorcycles:

CB350F - 1972-1974 
CB400F Super Sport - 1975-1977
CB500K - 1972-1973
CB550F Super Sport - 1975-1977
CB550K - 1974-1978 
CB750A Hondamatic - 1976-1978
CB750F Super Sport - 1975-1978
CB750K - 1969-1978