Reproduction Honda piston for the front brake caliper. Replace your piston if it has pitting. Brake effectively and ride safe with a new piston! Sometimes even after cleaning the piston and caliper the piston doesn't retract properly, make sure that the pads aren't rubbing after installing new brake parts. This piston fits into the stock caliper or a replica caliper.
The side that's darker in color with the 2mm outer lip, faces the brake pad. Some pads come with a plastic ring that goes between the pad and the piston, it helps the prevent brake from squeaking.
We suggest replacing the seal at the same time.
Equivalent to Honda OEM Part Number: 45107-323-020
Diameter: 38.14mm
Height: 34mm
Fits Honda:
CB350F 350 Four (CB350F0) - 1972-1973
CB350F1 350 Four - 1974
CB350G Super Sport 350 - 1973
CB360 (CB360K0) - 1974
CB360G - 1974
CB360T - 1976
CB360T (CB360T0) - 1975
CB400F Super Sport 400 Four - 1976-1977
CB400F Super Sport 400 Four (CB400F0) - 1975
CB450K5 Super Sport 450 - 1972
CB450K6 Super Sport 450 - 1973
CB450K7 Super Sport 450 - 1974
CB500 500 Four (CB500K0) - 1971
CB500K1 500 Four - 1972
CB500K2 500 Four - 1973
CB500T 500 Twin DOHC - 1976
CB500T 500 Twin DOHC (CB500T0) - 1975
CB550F Super Sport 550 Four - 1976-1977
CB550F Super Sport 550 Four (CB550F0) - 1975
CB550K 550 Four - 1976-1978
CB550K 550 Four (CB550K0) - 1974
CB550K1 550 Four - 1975
6 Reviews Hide Reviews Show Reviews
-
Caliper piston
Fit and performs perfectly.
-
Quality brake piston
Ain’t nuthin really better than new. This is a quality part. Don’t forget to get the caliper seal too. Also don’t forget to smudge in some silicone grease in there too if you can.
-
Perfect Fit CB350F
Perfect piston for my 73 CB350F. Make sure to get a new seal too.
-
REPLICA HONDA - FRONT BRAKE CALIPER PISTON
I chose the non genuine item over the original due to my budget limits, but the replica piston is just as well made and does the job as perfectly as would the genuine article. You could not wrong with what you buy from the 4into1 for Honda parts.
-
Worked perfectly
Once the caliper was taken apart, the install took about 5 seconds and worked perfectly straight away. Braking power impoved immediately, don't waste your time with that nasty old pitted caliper. While you're at it get a new piston seal.
-
Works great
Great replacement product for the original. Combined with a new seal, this caliper has my front brakes working great so far.