Set of 2 - Fork Seals - 33X44X9 - 91255-286-003 - Honda CB350 CL350 SL350

$4.00
(1 review) Write a Review
Availability:
Ships in 24 hours

Set of 2 Fork seals for the early years of the CB/CL/SL350 twins. When replacing fork seals be very careful not to scratch or gouge the aluminum during the removal of the old seals. Use a fork seal driver to install the new seals or use the old seal to help drive in the new seal. Be sure to drive it in evenly and make sure it fully seats so the snap ring can be installed. If you're unsure if your forks are stock please check the fork seal dimensions 33x44x9.

This is a high quality new seal produced in Taiwan. When it comes to rubber parts and seals it's generally better to install a brand new part instead of using a NOS part which has hardened due to age.

Clean everything thoroughly and install the new seal with a deep socket with the same outer diameter as the seal or a seal driver. Make sure to push it in evenly.

Replaces Honda part number: 91255-286-003
Dimensions: 33 X 44 X 9
Material: NBR (Nitrile)

Fits Honda:

CB350K - 1968-1971
CL350K Scrambler - 1968-1971
SL350K - 1969-1970

1 Review Hide Reviews Show Reviews

  • 5
    Also fits late model CB77 with aluminum forks

    Posted by Unknown on 20th Jun 2020

    This is the correct size seal for later model CB77 Works with aluminum lower sections. 33x43x9.1