All black tapered pod filters with red foam for the late 70's early 80's Honda's and many other models. Check the fitment list below for details. Includes black mounting clamps.
Keep in mind, for the bike to run smoothly, you may need to install larger jets and make other adjustments to match the higher air flow.
Sold as a set of 4.
IMPORTANT: Be sure to measure your carburetor prior to purchase. Also measure how much room you have between the carburetor and the frame or any side covers. Use the dimensions below to see if these will work on your bike. Just because the filters fit the carbs doesn't mean they'll fit in the bike without some obstruction.
Dimensions:
54mm ID where it mounts to the carburetors
71mm air filter length
90mm total length including rubber
74.5mm outer diameter of the filter
Fitment note: Honda changed from mechanical to CV carburetors on the CB650. CV carburetors have a tight spacing that may not work with these pods, see measurements above.
Fits Honda:
CB650 - 1981-1982 - Mechanical carbs / does not fit CV carbs
CB650 Custom - 1981 - Mechanical carbs / does not fit CV carbs
CB650SC Nighthawk - 1982 - Mechanical carbs / does not fit CV carbs
GL650I Silver Wing Interstate - 1983
CB750C Custom - 1980-1982
CB750F Super Sport - 1979-1982
CB750K - 1979-1982
CB750K Limited Edition - 1979
CB750SC Nighthawk - 1982-1983
CB900C Custom - 1980-1982
CB900F Super Sport - 1981-1982
CB1000C Custom - 1983
CBX Super Sport - 1979-1982
CB1100F Super Sport - 1983
Fits Kawasaki:
KZ1000A/J - 1981-1983
KZ1000B/K LTD - 1981-1982
KZ1000C/P Police - 1982-1999
KZ1000M CSR - 1981-1982
KZ1000R Lawson Replica - 1982-1983
KZ1100A - 1981-1983
KZ1100B GPZ - 1981-1982
KZ1100D Spectre - 1982-1983
KZ1100L LTD Shaft - 1983
KZ1300 - 1981-1982
KZ750B/E - 1980-1982
KZ750H LTD - 1980-1983
KZ750L - 1983
KZ750N Spectre - 1982-1983
ZL1000 Eliminator - 1987
ZN1100B LTD - 1984-1985
ZX550 GPZ - 1984-1985
ZX750 GPZ - 1982-1985
Fits Suzuki:
GS1000G - 1980-1981
GS1000GL - 1980-1981
GS1000S - 1980
GS1000S Katana - 1982
GS1100E - 1980-1983
GS1100G - 1982-1983
GS1100GK - 1982-1983
GS1100L - 1980
GS1100S Katana - 1983
GS1150E - 1984-1986
GS700E - 1985
GS750E - 1980-1983
GS750ES - 1983
GS850G - 1979-1983
GS850GL - 1980-1983
Fits Yamaha:
SR500 - 1978-1981
XJ650 Maxim - 1980-1983
XJ650L Turbo Seca - 1981-1983
XJ650R Seca - 1982
XJ900 Seca - 1983
XS1100 - 1978-1981
XS1100L Mid-Special - 1980-1981
XS1100S Special - 1979-1981
XS750 - 1977-1979
XS750S - 1978-1979
XS850 - 1980-1981
XS850L Mid-Special - 1980-1981
XS850S Special - 1980-1981
XT500 - 1976-1981
NOTE: Fits other model bikes as well. Check your carburetor flange diameter before purchase.