The Journeyman kit contains 3, 4, 6 and 8 pin locking type housings along with 6.3mm (.250") series connectors. These connectors are commonly found in vintage Japanese motorcycles. They're used for voltage regulator, rectifier, stator and sub-wiring harness connections. On many Honda models this type of connector is found under the left side cover where the regulator, rectifier, and sub wiring harness is located. If you're building a wiring harness this kit will come in handy!
If your original plastic connectors are falling apart replace them before the problem gets worse! Check your wiring harness to make sure the this plug matches, it's common for electrical parts to be replaced with non stock parts.
The terminals fit (.8 - 2 mm) 14-18 AWG wire.
Kit Includes:
- 2 - Male 8 Pin
- 2 - Female 8 Pin - Flange Type
- 2 - Male 6 Pin
- 2 - Female 6 Pin - Flange Type
- 2 - Male 4 Pin
- 2 - Female 4 Pin - Flange Type
- 2 - Male 3 Pin
- 2 - Female 3 Pin
- 50 - Male Spade Terminals
- 50 - Female Spade Terminals
8 Pin - Found in the sub-wiring harness on Honda SOHC motorcycles:
CB500K - 1972-1973
CB550F Super Sport - 1975-1977
CB550K - 1974-1978
CB750F Super Sport - 1975-1978
CB750K - 1969-1978
6 Pin - Replaces the stock Rectifier connection on Honda SOHC motorcycles:
CB350F - 1972-1974
CB400F Super Sport - 1975-1977
CB500K - 1972-1973
CB550F Super Sport - 1975-1977
CB550K - 1974-1978
CB750A Hondamatic - 1976-1978
CB750F Super Sport - 1975-1978
CB750K - 1969-1978