Universal right side motorcycle handlebar multi switch. Perfect for any custom build, or if you just need to replace the stock switches.
Note: 9 female bullet connectors are necessary to adapt the switch to your current wiring harness or you can choose connectors of your choice.
Wiring diagram available here.
Features:
Start Button
Kill Switch
On/Off Switch
Specifications:
Fits 7/8" Diameter Handlebars
Wire Length = 53.3cm (21 inches)
Body Width = 30mm (1.2 inches) extension Body Length = 69mm (2.7 inches)
Voltage Range = 10V - 14V
3 Reviews Hide Reviews Show Reviews
-
wrong size
good looking switch set. It was a little complected to get wired up due to the 4 wire start button. I was excited to get it all set up but is does not fit a 7/8 bar.
-
Had the right wiring, wrong labeling.
This switch cluster has four wires for the starter, which enables one to utilize the circuit on most Japanese bikes that cut off the headlight while the starter is running. The switches all work fine, but were labeled wrong from the designer/manufacturer. On is off, and off is on, weird, but the Emgo wiring diagram shows it was designed that way. Eh, who needs labels?! I solved the issue by intricately masking off the buttons and spraying the housing black. No labels are better than wrong labels, IMO.
-
The price is right
About as sturdy of construction as you would expect from an all plastic housing. Items to be aware of: It uses a ground wire, due the plastic housing. The kill switch and running switch are wired backwards, creating an open circuit in the on position and a closed one in the off position. I am using it on a 1974 Honda CB360.
