Universal Handlebar Stop / Headlight Switch Assembly - Right Side

Universal right side motorcycle handlebar multi-switch. Perfect for any custom build, or if you just need to replace the stock switches. This is similar to the switch on the 70's XL125 and XL175's. We suggest using heat shrink or insulated connectors to protect connections from shorting or getting wet.

This is a great switch to pair up with one of our push pull throttle assemblies. We also carry a variety of terminal connectors and insulators.

NOTE: There is a plastic locator pin on this switch as shown in the 3rd photo, you can drill a hole in your handlebars / use an existing hole / or remove the pin with a Dremel or similar tool.

Features:

Kill Switch - Off and Run position
Light Switch - O P H positions.
24" Kill Switch wires - Green / black/wht - both have male bullet terminals
20" Headlight wires - Black / brown/wht / wht/yel - all have male bullet - blue/wht wire with female bullet
Locator Pin to keep the switch from rotating - *see photo*

Specifications:

Fits 7/8" Diameter Handlebars
Body Width = 1 1/4" (32mm)
Body Height = 2 3/4" (70mm)