Brake Hose Male to Male Adaptor - Chrome - 10mm x 1.25

Brake hose male to male adaptor. This is the adapter used to attach stainless steel brake line directly to the front or rear brake caliper. This fitting is perfect for running the brake line directly from the master cylinder to the caliper. Use a crush washer at the master cylinder, but a crush washer isn't necessary at the caliper. The side with the inverted tip goes in the caliper, the other side attaches to the brake hose.

This fitting will work on most Honda, Kawasaki and Yamaha motorcycles with 10mm x 1.25 threading. The other side of the adapter fits AN3 (#3) stainless steel brake lines (all stainless lines we carry work with this fitting)

We carry various colors and lengths of stainless steel brake line.

This adaptor can be used on any of these calipers: 45101-300-053 (CB450K, CB750K), 45101-323-013 (CB350F/350G/360/400F/450K/500K/500T/550), 45101-392-003 (CB750A/F/K)
Check each caliper link to confirm it will work with your year.

Dimensions:

Threading: 10mm x 1.25mm (caliper side - inverted tip) - other side mates with AN3 stainless lines with female fittings. All stainless lines we carry are AN3 (#3) type.
Hex: 13mm
Overall Length: 29.5mm

Fits Honda: (Models with front disc brake)

CB350F Four - 1972-1974
CB350G Super Sport - 1973
CB360 - 1974
CB360G - 1974
CB360T - 1975-1976
CB400F Super Sport - 1975-1977
CB450K Super Sport - 1970-1974
CB750K Four - 1969-1976
CB750A Hondamatic - 1976-1978
CB750F Super Sport - 1975-1976
CB750K Four - 1977-1978
CB500T Twin DOHC - 1975-1976
CB500K Four - 1971-1973
CB550F Super Sport- 1975-1977
CB550K Four - 1974-1978

and many more...