Reproduction handlebar turn signal and throttle switch assemblies for the Yamaha DT series dual-sport models from 1974 to 1976. It's common for the stock switches to wear and corrode from decades of use. Sometimes the stock wires become brittle and break easily, so pick up a new switch and get back on the road!
If you are running aftermarket handlebars check to make sure the wire harness is long enough. Both switch are designed to have the wires run outside the handlebar.
Note: May require modification to the wiring to fit. Check the list of terminals and wire colors listed and compare to the switch being replaced.
Turn Signal / Light Switch Specifications:
- Wire harness overall length = 28" (loom 1 is 20" long)
- Loom 1 = 6 Male bullet terminals, yellow, brown, light green, dark green, pink, light orange/white line, and 1 dual female bullet terminal (blue)
- Loom 2 = 6 pin connector, white, blue/white line, green/white line, green red/line, yellow white line, brown
- Does not have a locator pin
Throttle Engine Stop Switch Specifications:
- Wire harness overall length = 18"
- 2 Male Bullet connectors - black/white, black
- Does not have a locator pin
Replacement for Yamaha Part Numbers: 558-83972-60-00, 498-83972-62-00, 1R6-83976-01-00
Fits Yamaha:
DT175 - 1974, 1976
DT250 - 1974-1976
DT360 - 1974
DT400 - 1975-1976
