Reproduction 12V Honda ignition coils with 90 degree spark plug caps. This kit includes 2 ignition coils and 2 spark plug caps. Use it with your points ignition or electronic ignition. We recommend fanning out the spark plug wires before twisting on the caps. We also carry an electronic ignition that fits many of the Honda 350's.
Specifications:
Spark plug wire is 19" long
Mounting holes are approximately 80mm (3.15") apart. (measured from the center of each hole)
6.5" blue wire with dual female bullet connector
5.25" black/white line wire with male bullet connector
Overall Outer Diameter: 48.6mm at the widest point.
Primary Windings: 5 ohms
Black wire connects to 12V power, blue goes to the points and condenser.
*Note: This coil does not come with any hardware to install it, but they will mount to the stock brackets on the models below.
Replaces Honda Part Numbers: 30500-312-007 (Coil assembly for the CB/CL/SL350), 30510-369-004, 30520-369-003 (Coil assemblies for the CB/CJ/CL360's), 30700-098-163 (spark plug cap)
Fits Honda:
CB350K - 1968-1973
CB350G - 1973
CL350K Scrambler - 1968-1973
SL350K - 1969-1973
CB360K - 1974
CB360G - 1974
CB360T - 1975-1976
CJ360T - 1976-1977
CL360K Scrambler - 1974-1975
18 Reviews Hide Reviews Show Reviews
-
Coils and caps made a positive difference in bike performance
Mounting was easy and bike runs smoother now. Wires are not color coded like originals.
-
Perfect
Perfect fit and half the price of other places for my cb360
-
Good Stock Replacement
What can be said? They bolted right in to my 73, CB350. Plugged them in and they worked. Easy, inexpensive, back on the road smilin'
-
It works!!
Works perfectly with my cl350.
-
CL350K5
Fits perfectly into my 72' CL350K5 without any modifications. This is important as I unfortunately dont have the skill to fabricate brackets like others do, and I know some other coils require modding the bracket. Paired up with the Pamco Ignition. No problems what so ever. Only downside is the inability to chance out the leads independently (I dont think).
-
Perfect
- fits perfectly the stock mounts on my CB350 K3 - 4.6 Ohms measured on primary - connector and wire seems of good quality - installed with Pamco electronic ignition - price is correct compared to "european price" - the connection of the NGK cap by "screwing" into the wire is not a masterpiece of engineering but it has proven its efficiency...
-
Great coils
Put these on a 75 CB360T and they rocked. Obviously out of suggested fitment, but my wife put these on her bike in the stock mounts and boom, consistent power.
-
Drop In
Drop in replacements for a 1972 CL350K4. Nice.
-
coils
Cleared the problem right up and easy to install.
