Reproduction intake insulators with clamps for your Honda CB500 or CB550! These are the rubber insulators between the engine and the carburetors. If you have an air leak on old, cracked insulators, have no fear....reproductions are available! Made from quality rubber that holds up well to gasoline and ethanol.
Kit Includes:
Intake insulators - Qty 4
Air box adapaters - Qty 4
Clamps - Qty 12
Note: 4 clamps are the same, they go on the air box adapters. The other 8 go on the intake insulators (engine side).
Replaces Honda Part Numbers: 16211-323-000 (insulators), 17310-323-010B (only the air box adapters), 95018-44250, 17255-323-000 (clamps)
Fits Honda:
CB500K Four - 1971-1973
CB550K Four - 1974-1976 (Does not fit 1977-1978 models)
CB550F Super Sport - 1975-1977
2 Reviews Hide Reviews Show Reviews
-
Excellent
Bought for a 1977 CB550F and these fit great. I used a little dielectric grease on the inside of the boots to ease installation and removal. They look great and seal well.
-
Boots cracking and splitting after 4 months.
I bought this set to replace the factory pieces on my 73 CB500K (which had some very light cracks) at the end of April 2019. Installing them was a bear as the material is very stiff. I never was able to get the airbox boots to fit correctly as the factory ones did. Every time I would start to tighten the clamp, the boot would just slide off the end of the carb. It is now August and every boot now has cracks around them. I don't believe them to be leaking yet but I expected better. I've bought many of parts from 4into1 and they have always been good parts at a good price, but these are very disappointing. I honestly wish I still had the 45 year old original parts to put back on the bike.
