Stainless Steel Brake Line Kit - Black - Single Line - Honda CB350/360/450/550/750

$34.96
(3 reviews) Write a Review
Availability:
Ships in 24 hours
Adding to cart… The item has been added

Black stainless steel braided brake line kit for the Honda models listed below. This kit is designed to be used with the stock handlebars, if you have non-stock handlebars, please take measurements prior to ordering. The stock handlebars for this kit had approximately a 4 1/2" rise. The kit is also designed to follow the stock brake hose routing. This is a great way to upgrade the brake lines on your vintage Honda. Why use new rubber lines when you can get better breaking response from stainless steel braided lines! We've done the work for you, get the complete kit!

The brake line mounts to the master cylinder with a 35 degree fitting, the other end mounts directly to the caliper with a chrome male to male fitting. This is the only chrome part in the kit.

This kit does not retain the use of the stock rear brake switch, you must use a hydraulic brake switch or a master cylinder with a brake light switch built in. 2nd photo illustrates how it mounts - kit does not come with the caliper. We have a hydraulic brake switch available separately here.

Features:

  • PVC hose coating adds great looks, abrasion protection to expensive parts and resistance to damaging UV rays
  • Compatible with all hydraulic and brake fluids
  • Stainless steel braid is superior in pressure rating, flame resistance and volumetric expansion to all other materials, including Kevlar®, resulting in unmatched stopping power
  • Braided cover eliminates the spongy lever feeling associated with rubber brake lines
  • Female to female matte-black zinc-plated fittings

Parts and Dimensions:

Brake Line with zinc plated ends: 37" qty: 1
Steel zinc plated 35 degree brake fitting: qty: 1
Aluminum Banjo bolt 10mm x 1.25 : qty: 1
Copper crush washers: qty: 2
Chrome Male to Male 10mm x 1.25 adaptor: qty: 1

Replaces Honda Part Numbers:

45126-300-003 - 15.5" Upper Brake Hose
45126-377-003 (14.5") or 45125-379-003 (13.25") Lower Brake Hose
45128-323-020 - 8" Metal Brake Pipe
45128-317-701 - 7.5" Metal Brake Pipe

Fits Honda (4 1/2" rise Handlebars or lower):

CB350G Super Sport - 1973
CB350F Four - 1972-1974
CB360K - 1974
CB360T - 1975-1976
CB360G - 1974
CB400F Super Sport - 1977
CB450K Super Sport - 1970-1974
CB500K Four - 1971-1973
CB500T DOHC Twin - 1975-1976
CB550K Four - 1974-1978
CB550F Super Sport- 1977
CB750K Four - 1969-1975
CB750F Super Sport - 1975-1976

and many others, take measurements....would fit CB550K 77-78 with lower handlebars (approx 4.5" rise)

3 Reviews Hide Reviews Show Reviews

  • 4
    Rubs tire without fender

    Posted by AMD on 24th Oct 2020

    If you have an aftermarket fender or no fender, this will rub your tire. It needs to be braced between the fender and the forks to angle the line away from the wheel tire. Not a problem, just worth knowing going into it.

  • 5
    Well made, easy to install and good looking.

    Posted by George on 24th May 2020

    While installing a front brake light switch I used the opportunity to additionally install this stainless steel beaded front brake line. It looks great and works perfectly. Very pleased with this.

  • 4
    Good finish

    Posted by Andres Diaz on 24th Apr 2020

    No leaks just plan out routing.