Reproduction front brake caliper kit for the Honda CB750A, CB750F 75-76 and CB750K 77-78. Stock calipers have a tendency to become corroded and the piston can seize inside the caliper. Brakes are important, if you're rebuilding your front caliper it might be time for a new one! Comes with everything in the photo.
This presents a solution to these questions...."what do I do if my piston is heavily pitted and so is the inside of my caliper?" or "my bleeder valve is seized and so is my piston!" Yes, some of us just start cleaning, soaking and scrubbing all the parts and replace individual parts such as the piston, seal and bleeder valve but if you want your caliper looking and working like new and you want to save a lot of time, get the complete caliper. Finish the job in minutes rather than hours!
We also have a complete caliper kit here.
Note: Brake calipers changed from year to year. There is another very similar looking caliper that was used on earlier models from early 70's. Mounting Spacing - 51mm (2") measured from center to center.
1 - Caliper A
1 - Piston Seal
1 - Bleed Screw
1 - Bleeder Screw Cap
1 - Piston
CB750A Hondamatic - 1976-1978
CB750F Super Sport - 1975-1976
CB750K Four - 1977-1978