Ignition Coils and Caps - Honda CB/CL/SL350K CB/CL/CJ360

Reproduction 12V Honda ignition coils with 90 degree spark plug caps. This kit includes 2 ignition coils and 2 spark plug caps. Use it with your points ignition or electronic ignition. We recommend fanning out the spark plug wires before twisting on the caps. We also carry an electronic ignition that fits many of the Honda 350's.

Specifications:

Spark plug wire is 19" long
Mounting holes are approximately 80mm (3.15") apart. (measured from the center of each hole)
6.5" blue wire with dual female bullet connector
5.25" black/white line wire with male bullet connector
Overall Outer Diameter: 48.6mm at the widest point.
Primary Windings: 5 ohms
Black wire connects to 12V power, blue goes to the points and condenser.

*Note: This coil does not come with any hardware to install it, but they will mount to the stock brackets on the models below.

Replaces Honda Part Numbers: 30500-312-007 (Coil assembly for the CB/CL/SL350), 30510-369-004, 30520-369-003 (Coil assemblies for the CB/CJ/CL360's), 30700-098-163 (spark plug cap)

Fits Honda:

CB350K - 1968-1973
CB350G - 1973
CL350K Scrambler - 1968-1973
SL350K - 1969-1973
CB360K - 1974
CB360G - 1974
CB360T - 1975-1976
CJ360T - 1976-1977
CL360K Scrambler - 1974-1975